Okay, so I lied. I spent yesterday cleaning up the Corvairs for the show Saturday. Today I finished welding the floor in, ground the welds smooth (left pic) and seam sealed all the joints (right pic). I think tomorrow I'm going to remove the drivers seat tracks and work on them until they glide smooth on the new floor tracks. Welding this was literally a pain in the back so it's rest time now.
Thursday, August 6, 2009
Okay, so I lied. I spent yesterday cleaning up the Corvairs for the show Saturday. Today I finished welding the floor in, ground the welds smooth (left pic) and seam sealed all the joints (right pic). I think tomorrow I'm going to remove the drivers seat tracks and work on them until they glide smooth on the new floor tracks. Welding this was literally a pain in the back so it's rest time now.
Tuesday, August 4, 2009
I did the final fit and got the pan spot welded into place. I started the finish welding and realized this is going to be a long process. There is a lot of leaning over involved and my back is complaining. I listened to the complaints and quit, I'll go at it again tomorrow. Probably even get some pictures too.
Yesterday I spent most of the day trimming the opening for fit, scraping off some undercoating left in the middle of the car under the "console", making and welding a patch panel for the bottom of the inner fender well shown above. Today, I hope, will be the final fit and welding of the floor panel.
Sunday, August 2, 2009
This is one of the floor pans as received from the vendor. It has the seat rails already attached on the top and has the two cross braces welded on the bottom. I am still trimming off the extra metal left when I removed the old floor. Hopefully, tomorrow I can start welding it in. I have to say I am very impressed with these floor pans. Everything is in place and correct and it looks like it will fit in exactly as the original floors. Any one considering this replacement, buy both sides at the same time. Shipping is the same for two as it is for one, $30.
Friday, July 31, 2009
The new floor pans arrived yesterday as promised so today was cut the floor out day! If you look real close at the before picture, you can see the various 3/16" thick patch panels added sometime in the cars life. The one that really made me shake my head in wonderment was the one under the outer seat track. The seat sat higher on the outside and would not adjust back and forth. What the hell kind of fix is this?? Makes you wonder when Darwin's theory takes hold. I used my cut off tool on the outer edge and on the rest I used my plasma cutter. The results are shown in the other picture. Felt a twinge in my back and decided enough for today. Tomorrow I will trim off all the little extra pieces and start fitting the new floor pan. It looks like it installs from the bottom, I'll find out for sure tomorrow. When it all fits nicely, I'll glue it all in with body filler and pop rivets. PSYCH!! I will actually break out the MIG welder and weld it all together. After any finish grinding I have to do, all the seams,inside and out, will be covered with paintable seam sealer.
Wednesday, July 29, 2009
Not much to report, moved the car back into the working bay and lifted it up preparatory to replacing the drivers floor. Also removed the gas tank and siphoned out the stale gas that was in it. I then removed the sending unit to see what shape the tank is in. Bad move, looks like it is full of coffee grounds. I'm checking on the availability of a new tank versus sending the tank to Tank Re-Nu for refurbishing. Bead blasted then buffed and clear coated the gas cap, made a new rubber gasket for it also. Scraped, sanded, buffed and clear coated the aluminum scuff guard on the bottom of the door opening. It had navy blue, red and dark green paint on it. Those colors are nowhere else on the car, can't explain it.
Subscribe to:
Posts (Atom)