Today was fix the fender lip day. I finally got to use the amazing magical shrinker-stretcher machine. The job I've been dreading took about 5 minutes to form the new lip and about 3 hours to cut, install, weld and grind. You can see the shape the fender was in after cutting off the rust and ragged edges left by a previous owner. The second picture shows the completed installation ready for epoxy primer and then a thin coat of body filler. After a second coat of Primer, a coat of sealer, a coat or two of sanding primer and it's ready for finish painting. Sounds a lot simpler than it's going to be but I'm making headway.