And so it begins, I started stripping the paint off of the engine lid. I was surprised how much surface rust was under the factory paint. When all the paint is gone, I'll go over it with a scotchbrite wheel,wipe it down with metal prep, wash and dry it and move on to the next section. The metal prep will prevent it from rusting until I can spray some epoxy primer on it. Only then will I use body filler to smooth out any small dents I can't get with a hammer and dolly. Body filler sticks to the primer better than it does to bare metal. Also makes it easier to see the dents.
Monday, September 28, 2009
And so it begins, I started stripping the paint off of the engine lid. I was surprised how much surface rust was under the factory paint. When all the paint is gone, I'll go over it with a scotchbrite wheel,wipe it down with metal prep, wash and dry it and move on to the next section. The metal prep will prevent it from rusting until I can spray some epoxy primer on it. Only then will I use body filler to smooth out any small dents I can't get with a hammer and dolly. Body filler sticks to the primer better than it does to bare metal. Also makes it easier to see the dents.
Tuesday, September 22, 2009
Tuesday, September 8, 2009
Tuesday, September 1, 2009
I had an unexpected break from Corvair work so I jumped on the little car again to replace the passenger floor. Changed the lift over to fit and raised the car to working height. You can see why I am replacing this side also. By the time I removed the interior door upholstery, the door stop and the hinge screws, I removed the door and the polished aluminum door garnish strip, it was time to rest the back, leaning over really kills me. Tomorrow should be cutting out the old floor and trimming the new floor to fit, we shall see.
Tuesday, August 25, 2009
Since my lift is still full of Corvair, I started looking for something to do that didn't involve the lift. I decided to refurbish the headlight buckets. They underwent the usual blast, prime and paint treatment as shown above. Why red springs? Why not? Maybe they will act as a hidden identifier if the car is ever stolen. When the buckets are installed in the car, they will get new headlight bulbs even though these check out okay. I also need to get some more of the retaining spring wire thingies, I'm missing three of them.
Friday, August 7, 2009
Subscribe to:
Posts (Atom)